Industrial Column - Wall Formwork

 

PORTIWOOD Column - Wall Formwork Systems in general;
 
 It is formed by connecting H20 wooden girders a filled body to steel stringcourse resistant to pulling and tension with Stringcourse Connection Clips, which are capable of force transfer, and by covering this framework, which is formed by this way, with 18 or 21 mm formwork plywood. The formed panels are connected to Stringcourse Connecting Components by shafts. Since connection of panels is performed by shafts, this provides convenience during the mounting and dismounting stages. The pressures over the both sides of the wall formwork are transferred and moved correlatively by the tie rods, which are passing through PVC pipes left within the formwork. This anchorage system is able to carry 90 kN tensile loads safely. 
 
 Once the panels, which form the PORTIWOOD system, are mounted, they can be used as a one piece standard component. A swift circulation is ensured by carrying with a crane. 
 
    The used intermediary parts (filler plate) are capable of adapting to every type of project and to the geometries in different sections of the project thanks to adaptors. The formworks are plummeted vertically by a two levered buttress, an axial buttress and an adjustment buttress. The static calculations of the formwork are carried out according to the German DIN 18218 norms. The wall formwork can be raised swiftly, safely and properly by using H20 - H20 connection component for the different concrete heights of the project.
Advantages of PORTIWOOD System

1- LIGHTNESS
Since they are lighter than the sheet and aluminum panels used as wall formwork, there is an opportunity to work with a lower crane capacity. This decreases the working time of the crane.

2- EASY TO MOUNT
Since the used components are formed swiftly and practically as panels, a lot of work is done with much less labor. This provides an installation conveniently with a hammer and a drill.

3- STABILITY
The panels, which are applicable to different heights and widths, have a rigid structure resistant to higher tension. The wall formworks in PortiWood system are durable to 50 kN/m², and column formworks to 90 kN/m² concrete pressure.

Application